Notice
1.The punch press must have the corresponding control programs.
2.Curve, circular arc and circle can be processed on the indexing station .
3.After processing without over-lapping or stamping mark on sheet.
4.High-speed forming equivalent to the moving speed of carriage.
5.The minimum turning radius is 40mm, depending on the width of the rolling wheels.
6.The machining range: thickness S.S. 0.8-1.5mm，S.P.C.C. 0.8-2.0mm，AL 0.8- 2.5mm; The forming height is 2-3 times of the material thickness, the forming width is 2 times of the forming height, and the max width.
